Losing your board can be an expensive proposition. Most surfers know the benefits of using a surfboard leash. In fact, boards already come with the attachment so you can wear one and easily connect it to your board. Having one on when you come off the board prevents losing it, but there are several styles to choose from that make a difference in how well they work and drag on the board.
The first part you'll notice is the cuff. There are two places it can be worn. Most wear them on the ankle since this is the most comfortable. It's high and not in the way. For those that use the longboard, they often like to have them on the calf part of the leg. This, coupled with a longer leash, lets them move back and forth on the board more freely without getting tangled in the cord. Having the cord attached to the ankle also makes it easier to pull back to the board when you're in the water. On the calf, it is more difficult.
Swivels are a nice device to include. This piece allows the cord to spin freely without getting tangled or bunched up. If the cord starts to bunch it shortens its length. Having a swivel prevents this and makes it much easier to control the cord in the water.
Cords are usually made from polyurethane. The important aspect is the thickness. Professional surfers prefer a thinner cord to prevent drag. Beginners should start with the thicker cord until they are more experienced at falling off the board. This seems odd, but professionals are good at coming off the board in a less violent way. The thinner cords can easily break if the surfer and the board are separated in a rough manner.
Rail savers are connected to the board. The end of the cord contains a fabric piece that is used to protect the end of the cord that goes into the board. These can also be thick based on your personal preference. The thicker the rail saver, the more drag it causes in the water, even though it offers more protection to the end of the cord.
Finding the right length is important. New surfers might think that having a longer cord is better. It is not. In fact, they need to be sized just right so the board doesn't wander into the path of another surfer or get tangled around their feet or the fin. Longboards usually have longer leashes so the surfer can move around. They usually come in lengths from 4 feet up to 12 feet long depending on your need.
Drag is a problem in competition. For beginning surfers, this is not a concern. They are less likely to notice it while they're gaining experience. Once they switch to the thinner cords, they'll notice a significant improvement in drag. Competitive surfers typically use a much thinner cord to eliminate as much drag as possible.
Surfing is a great way to have fun in the sun. Those that take it seriously will have all the right equipment in order to be competitive and move as quickly and smoothly as possible. The right leash, in the right position, can keep you attached to your board and never slow you down.
The first part you'll notice is the cuff. There are two places it can be worn. Most wear them on the ankle since this is the most comfortable. It's high and not in the way. For those that use the longboard, they often like to have them on the calf part of the leg. This, coupled with a longer leash, lets them move back and forth on the board more freely without getting tangled in the cord. Having the cord attached to the ankle also makes it easier to pull back to the board when you're in the water. On the calf, it is more difficult.
Swivels are a nice device to include. This piece allows the cord to spin freely without getting tangled or bunched up. If the cord starts to bunch it shortens its length. Having a swivel prevents this and makes it much easier to control the cord in the water.
Cords are usually made from polyurethane. The important aspect is the thickness. Professional surfers prefer a thinner cord to prevent drag. Beginners should start with the thicker cord until they are more experienced at falling off the board. This seems odd, but professionals are good at coming off the board in a less violent way. The thinner cords can easily break if the surfer and the board are separated in a rough manner.
Rail savers are connected to the board. The end of the cord contains a fabric piece that is used to protect the end of the cord that goes into the board. These can also be thick based on your personal preference. The thicker the rail saver, the more drag it causes in the water, even though it offers more protection to the end of the cord.
Finding the right length is important. New surfers might think that having a longer cord is better. It is not. In fact, they need to be sized just right so the board doesn't wander into the path of another surfer or get tangled around their feet or the fin. Longboards usually have longer leashes so the surfer can move around. They usually come in lengths from 4 feet up to 12 feet long depending on your need.
Drag is a problem in competition. For beginning surfers, this is not a concern. They are less likely to notice it while they're gaining experience. Once they switch to the thinner cords, they'll notice a significant improvement in drag. Competitive surfers typically use a much thinner cord to eliminate as much drag as possible.
Surfing is a great way to have fun in the sun. Those that take it seriously will have all the right equipment in order to be competitive and move as quickly and smoothly as possible. The right leash, in the right position, can keep you attached to your board and never slow you down.
About the Author:
When you are looking for information about a surfboard leash, come to our web pages online today. More details are available at http://www.culpritsurf.com/product-category/surfboard-leashes/high-performance-leashes now.
Posting Komentar